PLM News |

Media Coverage




PLM Software Monoist
Monoist - May 2016
『なぜモノづくりシステムのROIはよくないのか? 5つの理由』をご紹介します。


PLM Software Desktop Engineering
Desktop Engineering - May 2016
“Nevs is both developing innovative electric vehicles and transforming their business processes at the same time,” said Peter Schroer, CEO of Aras. “It’s an opportunity to rethink the business of engineering starting with a clean sheet for the design and development of electric vehicles.”


PLM Software Desktop Engineering
Desktop Engineering - April 2016
Toshiba Machine has selected Aras Innovator to streamline its design and manufacturing processes as it expands internationally. After replacing a legacy PLM (product lifecycle management) data system, Toshiba will use Innovator for bill of materials and CAD data management for made-to-order products.


PLM Software Monoist
Monoist - April 2016
モデルベースシステムズエンジニアリング(MBSE)の権威である、ドイツ・カイザースラウテルン工科大学教授のマーティン・アイグナー氏が来日。欧米の自動車メーカーと比べてMBSEへの取り組みが遅れている日本の自動車メーカーのエンジニアにMBSEの有用性を説いた。


PLM Software CIO Review
CIO Review - March 2016
Manufacturing used to be more simple. In 1960s, most products were mechanically focused, with some electrical and other systems, depending upon the application. Advancements in electronics made their way into all manners of manufacturing products, making them "smart," or at least smarter than previous generations by adding capabilities and making their use more convenient, but the electronics were still relatively fixed, with little or no software.


PLM Software CIO Review
CIO Review - March 2016
In today's fast paces and globalized world, the need for PLM has never been greater. Are PLM tools ready to meet the challenges of today's distributed, mobile world? Is your IT department ready to configure, integrate, evolve and operate a critical platform that will help manage your future revenue streams? Let's examine the current drivers for PLM implementation and how the marketing and international IT needs to evolve to meet the challenges of tomorrow.


PLM Software Monoist
Monoist - March 2016
Arasは、大手自動車の部品メーカーであるユタカ技研が、グローバル拠点における製品ライフサイクル情報の統合および一元管理を行うPLMとして「Aras Innovator」を採用したと発表した。


PLM Software ZDNet Japan
ZDNet Japan - March 2016
今後、工業製品のソフトウェアによる制御部分がますます増える以上、ハードウェアとソフトウェア両方に関する情報を一元管理し、それぞれの開発部隊が逐一問題を発見し、迅速に解決できる体制を整える必要がある。EBOM(設計BOM) 、MBOM(製造BOM)といった部品管理手法にソフトウェアの情報を連動させることが大切だ。
製品ライフサイクルマネジメント(PLM:Product Lifecycle Management)製品を開発、提供している米Arasの日本法人、アラスジャパンの社長を務める久次昌彦氏は、次のように話す。


PLM Software Beyond PLM
Beyond PLM - March 2016
Aras is going after a massive amount of problems in every manufacturing organizations – management of Bills of Materials, Engineering Change Processes, Quality, Compliance, Regulation, etc. These problems have no agreed name in a lexicon of manufacturing companies. Everyone calls it different. But here is the problem for most of PLM vendors – majority of companies are in agreement that Excel is the best solution to solve these problems.


PLM Software TechRepublic Japan
TechRepublic Japan - March 2016
アラスジャパンの「Aras Innovator」は、エンタープライズ向けの製品ライフサイクル管理(PLM)パッケージソフトである。コア機能に関してはオープンアクセス機能となっており、誰でも自由にダウンロードして利用できる。
単一の部門や機能に絞った情報管理から、複数の部門や部品納入業者までも含めた業務プロセス改革にまで対応する。製品のライフサイクルを通じた、ものづくりに関する情報の統合管理環境を整えられるという。


PLM Software CIO Review
CIO Review - March 2016
Product lifecycle management like every technological advancement, has a lifecycle of its own. Various technology and non-technology oriented trends are placing great pressure on traditional product lifecycle management approaches; many of which are resulting in new ways of looking at and enabling innovation. This evolution is underway and there are no signs that it will slow down.


PLM Software Desktop Engineering
Desktop Engineering - March 2016
Saab, a provider of products, services and solutions for military and civil security, has selected Aras to support its product complexity workflow for the the Gripen fighter aircraft. Saab will be using the Innovator and Minerva platforms in partnership with its current PLM (product lifecycle management) platform.


PLM Software Nikkei Technology Online
Nikkei Technology Online - March 2016
米Aras社とエリジオン(本社浜松市)は2016年2月29日、PLMプラットフォーム「3DEXPERIENCE」(仏Dassault Systemes社)と、ArasのPLMツール「Aras Innovator」の間でデータを連携させるツール「Elysium xPDM for Aras」を発表した(ニュースリリース)。


PLM Software Mynavi
Mynavi - March 2016
Arasとエリジオンは2月29日、「Elysium xPDM for Aras」を発表した。 同ソリューションはダッソー・システムズ(ダッソー)の3DEXPERIENCEプラットフォームとAras InnovatorのPLMプラットフォーム間でのデータ連携を実現するもの。ArasのWebサービスAPIとダッソーの3DEXPERIENCEプラットフォーム間をxPDMのインフラストラクチャを通じて、セキュアにデータを転送することができ、CATIA V6のようにファイルを持たないCADシステムとのインテグレーションも可能だ。


PLM Software MCAD Café
MCAD Café - February 2016
“The new connector solution from Elysium fits perfectly with our PLM platform strategy to address the ‘no file’ world of CAD systems like CATIA V6 by providing global companies with a seamless way to integrate to the 3DEXPERIENCE environment,” said Doug Macdonald, Product Marketing Director at Aras. “Having the ability to bring MCAD data from multiple systems together with ECAD designs, software and firmware at the product’s system-level configuration is critical to coordinate development, achieve quality and meet deadlines.”


PLM Software MCAD Café
MCAD Café - February 2016
With Aras Innovator, CGI Business Consulting plans to develop operational frameworks and IP for system engineering, advanced manufacturing engineering, and compliance processes including Advanced Product Quality Planning (APQP), as well as, creating an ISO IDMP standards repository for life science data used in submissions.


PLM Software Nikkei Technology Online
Nikkei Technology Online - February 2016
PLM(製品ライフサイクル管理)ツール「Aras Innovator」を開発する米Aras社CEOのPeter Schroer氏と、カイザースラウテルン工科大学教授でバーチャルプロダクトエンジニアリング研究所(VPE)の所長を務めるMartin Eigner氏は、日本の自動車メーカーとモデルベース・システムズエンジニアリング(MBSE:Model Base System Engineering)に関するミーティングのためにこのほど来日、その狙いなどについて語った。


PLM Software MCAD Café
MCAD Café - February 2016
The ACE conference series brings together industry and technology leaders from around the world to connect and collaborate on strategies to address the growing complexity in global product development, systems engineering, manufacturing, quality and the supply chain.


PLM Software Monoist
Monoist - February 2016
ソフトウェアそのものは無償で提供するという、サブスクリプション型ビジネスモデルで導入数を伸ばしている米国のPLMベンダーAras。
同社では2016年より、パートナー企業での成功事例をベースに開発した一種の“テンプレート”を製品の機能として順次提供していく方針だ。


PLM Software Nikkei Technology Online
Nikkei Technology Online - January 2016
米Aras社は、PLMツール「Aras Innovator」の最新版で、さまざまな業務に共通に使える情報参照・運用のためのフレームワーク「CMF(Content Modeling Framework)」を導入した。同社が2015年末に公開したAras Innovatorバージョン11.0SP5で利用可能にした。このCMFをベースに作成したアプリケーション・モジュール「Quality Management System(品質管理)」「Technical Document(技術文書作成)」「Manufacturing Process Planning(製造工程計画)」などを2016年第2四半期から本格的に提供する予定だ。


PLM Software Nikkei Technology Online
Nikkei Technology Online - January 2016
PLMソリューション「Aras Innovator」を提供するアラスジャパンが、日本法人設立3年半を経て業績が拡大期に入っている。モデルベースSOAというArasInnovatorのアーキテクチャーの利点を生かし、受注生産型の製造業からの支持や、設計者のコラボレーションニーズにも対応したPLMであることがその理由だ。同社 社長の久次昌彦氏は、ものづくりをビジネスの視点から最適化できるソリューションへ、機能を拡張していく方針を示した。


PLM Software ENGINEERING.COM
ENGINEERING.COM - January 2016
Product teams that are developing next-generation systems have to integrate processes and data across disciplines, including mechanical, electrical and software. One challenge they face is the diversity of lifecycle support for products, systems, hardware and software for application lifecycle management (ALM) and product lifecycle management (PLM) such as defining and releasing engineering deliverables, handling the different pace of change and coordinating configurations across the disciplines.


PLM Software Desktop Engineering
Desktop Engineering - December 2015
Aras, a provider of PLM (product lifecycle management) software, has partnered with CloudSAFE to launch the CloudSAFE PLM Cloud. The platform is offered as a monthly subscription and powered by Aras’ Innovator framework. Organizations an choose to implement a private or hybrid cloud configuration without needed extensive knowledge of setup, configuration or maintenance.


PLM Software MCAD Café
MCAD Café - December 2015
Aras and CloudSAFE announced the availability of CloudSAFE PLM Cloud powered by Aras Innovator®. The offering, available via a monthly subscription, provides comprehensive services for rapid private or hybrid cloud deployment of the complete Aras PLM solution. For companies wishing to leverage a hybrid deployment of on-premise and cloud resources, the CloudSAFE PLM services, PLM-Appliance and hosted private network options simplify the process.


PLM Software CIMdata
CIMdata - December 2015
Murata chose Aras because the flexibility and customizability of the solution is ideal for accommodating the expanding business initiatives created through mergers and acquisitions, where the ability to easily adapt to varying product management workflows is a requirement. Additionally, Aras will be used to more efficiently manage customer requirements and improve customer service.


PLM Software Desktop Engineering
Desktop Engineering - December 2015
Aras, a provider of PLM (product lifecycle management) software, has released its Technical Documentation application. This platform, the company states, provides capabilities for authoring, visualizing and publishing of regulatory, safety and technical publications.


PLM Software ENGINEERING.COM
ENGINEERING.COM - December 2015
The Aras Technical Documentation application uses data controlled by the PLM system to create various kinds of technical documents such as catalogs, maintenance manuals, regulatory filings and training manuals. The application is built on the Aras Innovator PLM platform, and requires the platform to run. But for customers already using Innovator, there are a whole slew of advantages.


PLM Software MCAD Café
MCAD Café - December 2015
Developed in partnership with Orio AB (formerly Saab Original Parts AB), the web-based solution allows many publications to share the same source information in a modular fashion, eliminating data duplication. Document assembly is managed using templates, ensuring publications conform to regulatory requirements, industry standards and corporate formatting.


PLM Software Supply & Demand-Chain Executive
Supply & Demand-Chain Executive - November 2015
CloudOne eliminates the time needed for hardware provisioning and software infrastructure deployment, ensuring companies get running quickly and realize a faster return on investment. Running Aras Innovator PLM as a Managed Service by CloudOne enables enterprises to achieve new levels of scalability, performance and partner collaboration with PLM.


PLM Software CIMdata
CIMdata - November 2015
Aras Innovator PLM as a Managed Service by CloudOne CloudOne eliminates the time needed for hardware provisioning and software infrastructure deployment, ensuring companies get running quickly and realize a faster return on investment. Running Aras Innovator PLM as a Managed Service by CloudOne enables enterprises to achieve new levels of scalability, performance, and partner collaboration with PLM.


PLM Software MCAD Café
MCAD Café - November 2015
“With Aras on CloudOne, customers are getting a white glove service powered by a team of IT specialists that are experts in the infrastructure, cloud security, and maintenance required for Aras Innovator,” said John McDonald, CEO at CloudOne.


PLM Software Desktop Engineering
Desktop Engineering - October 2015
Aras, a provider of PLM (product lifecycle management) software, has partnered with T-Systems to launch a PLM Cloud Platform Software-as-a-Service. Running on a secure infrastructure, the T-System PLM Cloud Platform offers end-to-end services with full Aras Innovator functionality, customization and integration capabilities, a company press release states.


PLM Software MCAD Café
MCAD Café - October 2015
Aras and T-Systems, a global provider of information and communication technology for multinational corporations and public sector institutions, today announced the launch of the new T-Systems PLM Cloud Platform powered by Aras Innovator®. Delivered as Software-as-a-Service (SaaS), the T-Systems PLM Cloud Platform combines end-to-end services with full Aras Innovator functionality, customization and integration capabilities.


PLM Software CIMdata
CIMdata - October 2015
Aras® and T-Systems, a global provider of information and communication technology for multinational corporations and public sector institutions, today announced the launch of the new T-Systems PLM Cloud Platform powered by Aras Innovator®. Delivered as Software-as-a-Service (SaaS), the T-Systems PLM Cloud Platform combines end-to-end services with full Aras Innovator functionality, customization and integration capabilities.


PLM Software CIMdata
CIMdata - October 2015
Triangle Package Machinery selected Aras PLM for the platform’s advanced solutions and flexibility to meet the wide array of product information and viewing needs of each department. Managing the development, manufacture and customer support for products that incorporate over 300,000 components and 800,000 sales, engineering and manufacturing artifacts makes PLM system flexibility paramount to Triangle Package.


PLM Software CIMdata
CIMdata - October 2015
Aras announced that representatives from Airbus, BAE Systems, and ECCO will be speaking at ACE Europe, the annual Aras user conference to be held in Berlin on November 10 & 11. PLM experts and software users will offer insights and new approaches to ALM/PLM integration, Model Based Systems Engineering (MBSE), secure collaboration, PLM flexibility, connected products, cloud deployment options and Industry 4.0.


PLM Software CIMdata
CIMdata - October 2015
BAE Systems Sweden has selected Aras gold certified partner Minerva, based on technical expertise and experience, to conduct the Aras implementation and data migration from the two legacy PDM systems, using a multi-phase approach. Phase one will include Aras solutions for configuration management, Bill of Materials (BOM) and document/CAD management, enterprise reporting and searching, and secure social, as well as integrations to multiple MCAD and ECAD systems, SAP and IFS ERP, and Eurosteps Share-A-space data repository.


PLM Software Nikkei Technology Online
Nikkei Technology Online - October 2015
PLM(製品ライフサイクル管理)ツールの雄、米Aras社は2015年、次世代PLMツール「Aras Innovator 11」を発表した。従来からある3DCADデータを管理するだけという古い概念を打ち壊し、3DCAD、BOM(部品表)、回路設計、ソフトウエア開発に至るまで、あらゆるデータを合わせて管理することで、製造業が新しいステージに上がることを促す。アラスジャパン主催のセミナーでは、「ReThink PLM(PLMを再考する)」をテーマに、最新テクノロジーや多数の事例が紹介された。


PLM Software CIMdata
CIMdata - October 2015
Working with Aras Gold Certified Partner Razorleaf, Laird selected Aras Innovator for the platform’s flexibility to meet the distinct configuration needs of each business unit. PLM system flexibility is vital to Laird, as the company develops a broad range of mission-critical systems, components, and solutions for customers in multiple industries from over 50 facilities in 19 countries across the globe.


PLM Software atmarkIT
atmarkIT - October 2015
「品質、費用、納期」の最適化が求められるモノ作りの世界では、製品に関する情報を企画から、設計、生産、保守までのライフサイクルで統合的に管理するPLMツールの導入が進んでいる。その有力製品の一つが、アラスが提供する.NETベースの「Aras Innovator」だ。クラウドへも対応済みで、Microsoft Azure上での無償トライアルも用意されている。


PLM Software MCAD Café
MCAD Café - September 2015
Now certified to run on Azure, Aras Innovator 11 is the most complete and customizable cloud ready PLM suite for global companies with complex products that incorporate electronics, software and mechanical designs. Aras on Azure is ideal for enterprises that need to be up and running quickly with a complete PLM environment for supply chain co-development initiatives, joint ventures, rapidly evolving product lines and other fast-paced environments.


PLM Software CIMdata
CIMdata - September 2015
Aras on Azure includes multidisciplinary bill of materials (BOM) management, configuration management, change workflows, stage-gate projects, CAD integrations and more. Designed from the outset to support cloud deployment options, Aras Innovator on Azure provides full customization, integration and data federation capabilities for extensibility without limitations.


PLM Software Desktop Engineering
Desktop Engineering - September 2015
To address the challenges of designing and building complex products, Aras rolled out a partnership with Altium, one of the big players in electronic design automation (EDA) software. Their work together is squarely aimed at building tighter integration between the different engineering disciplines — electrical design being the hallmark of this deal — giving the Aras Innovator PLM platform more depth in the area of holistic systems design.


PLM Software CIMdata
CIMdata - September 2015
GCO SAS France, a part of AGCO Corporation, a leading manufacturer of agricultural equipment sold in over 140 countries which include the global brands Challenger, Fendt, Massey Ferguson, Valtra and GSI, has deployed Aras Innovator® to consolidate product engineering systems and processes. Aras Innovator will integrate with, and complement, the existing AGCO corporate engineering PDM system.


PLM Software CIMdata
CIMdata - September 2015
Aras® announced the availability of the CloudSAFE PLM Appliance with cloud-based back-up and disaster recovery. This is the first in a line of pre-packaged PLM infrastructure appliances powered by Aras Innovator® that provide a scalable, ready-to-run PLM solution. The appliance, co-developed, built, and deployed with Aras engineers, assures optimum performance, reliability, and security.


PLM Software MCAD Café
MCAD Café - September 2015
The Aras Quality Management System application provides businesses with advanced product quality planning (APQP) tools to manage risk, improve quality, and attain environmental, regulatory, safety, medical, and other forms of compliance. The application also helps suppliers demonstrate compliance with quality mandates from their OEM customers.


PLM Software Monoist
Monoist - September 2015
アラスジャパンはユーザーイベント「Arasコミュニティイベント(ACE)2015 Japan」(2015年9月2~3日)を開催。
同イベントではアラスジャパンの社長を務める久次昌彦氏が登壇し、昨今の製品開発を取り巻く環境変化とそれに向けた同社のPLM製品の展開方針について語った。


PLM Software Monoist
Monoist - September 2015
Arasは2015年7月7日、電子・メカトロニクス設計と製造ソリューションの先進的企業であるスウェーデンのESCATECが、エンタープライズPLMとして同社の「Aras Innovator スイート」を採用したと発表した。
ESCATECでは、製品情報管理の効率化と世界規模でのコンカレントエンジニアリング実現のため、エンタープライズPLMとしてArasを採用。これにより、グローバルな研究開発・プロセスエンジニアリング・顧客管理・工場その他のプロセスなど、研究開発部門から製造部門まで、事業部門全般の製品データを、同ソリューションを通じて管理することになる。


PLM Software MCAD Café
MCAD Café - September 2015
With Aras Innovator connected to Altium Vault, the Altium centralized database for ECAD design data, global businesses can efficiently manage multidisciplinary bill of materials and enterprise-level configuration, change, and requirements management. This provides engineers with full product visibility, breaking down departmental and functional silos and enabling cross-discipline collaboration between mechanical, electrical, and software disciplines.


PLM Software CIMdata
CIMdata - September 2015
With Aras Innovator connected to Altium Vault, the Altium centralized database for ECAD design data, global businesses can efficiently manage multidisciplinary bill of materials and enterprise-level configuration, change, and requirements management. This provides engineers with full product visibility, breaking down departmental and functional silos and enabling cross-discipline collaboration between mechanical, electrical, and software disciplines.


PLM Software CIMdata
CIMdata - September 2015
Aras Component Engineering leverages data from business information provider IHS Inc. to streamline electronic component selection, approval, sourcing, and lifecycle management by providing engineers with current technical and compliance information, as well as part and supplier statuses — all accessible from within the PLM workflow.


PLM Software CIMdata
CIMdata - September 2015
Seaspan’s Vancouver Shipyards (VSY), a pioneer in shipbuilding and ship repairs, has selected the Aras Innovator® platform for PLM to support their development as a world-class shipbuilding company under the Government of Canada’s National Shipbuilding Procurement Strategy (NSPS). Seaspan will use Aras to unify critical processes for the design, construction, maintenance and repair of vessels.


PLM Software Nikkei Technology Online
Nikkei Technology Online - September 2015
米Aras社は2015年内から2016年にかけて予定している機能強化の内容を明らかにした。年内には現行バージョンの「Aras Innovator 11」上で動作するアプリケーション数種類を出荷する予定。アプリケーションは「Quality(品質管理)」「Technical Documentation(文書管理)」「Manufacturing Process Planning(生産準備)」「Supplier Portal」などで、これまで特定ユーザーが実装していた機能を一般化するなどして提供する。さらに、次期版「同12」を2016年中ごろに利用可能にするという。


PLM Software CIMdata
CIMdata - August 2015
Working with Aras Gold Certified Partner Focus PLM, Habasit Italiana has standardized collaborative product development with Aras. This has streamlined the process of incorporating contributions from a network of global suppliers and design partners, further advancing Habasit Italiana’s award-winning product lines.


PLM Software Beyond PLM
Beyond PLM - August 2015
Aras is shaking the fundamentals of existing PLM business models (expensive licensing, customer lock-in, maintenance and services leverage). Software industry is shifting to subscription and Aras’ move can be a trigger that will help PLM industry to re-think the way PLM should be sold.


PLM Software Beyond PLM
Beyond PLM - August 2015
Aras stands out by 3 differentiation factors – free licensing, upgrade included in subscription services and technology to define everything in the system using XML-driven language. There is a connection between technical and business factors. The model driven SOA gives a unique ability to support lifecycle of Aras implementations and future upgrades.


PLM Software 日刊工業新聞
日刊工業新聞 - August 2015
IOTでどう みを打ち出すか注目がまる 「アラス・イノベーター」


PLM Software CIMdata
CIMdata - August 2015
Working with Aras gold certified partner Razorleaf, Carlisle Brake & Friction selected Aras PLM for the platform’s flexibility and extensive out-of-the-box best practice solutions. Integrating to Creo CAD and QAD ERP systems, Aras Innovator will unify Carlisle’s ITAR compliance, engineering processes, parts management, BOM management, change management, and auditing at 11 manufacturing and purchasing facilities worldwide.


PLM Software Monoist
Monoist - July 2015
Arasは2015年6月30日、エアバスと戦略的パートナー契約を締結したと発表した。エアバスでは、社内ユーザー約3万人のエンジニアリング・ビジネスプロセスにPLMプラットフォーム「Aras Innovator」とソリューションスイートを導入。求められる領域・要件を十分に満たしていること、開発を伴わずにオンザフライで高度なデータモデリングが可能なオープンアーキテクチャであること、カスタマイズのためのアップグレードサービスがサブスクリプション契約に含まれていること、インテグレーションと操作が容易であること、長期的な拡張性と総所有コストを両立できることを評価したという。


PLM Software Desktop Engineering
Desktop Engineering - July 2015
Airbus recently signed a deal to deploy the Aras Innovator platform across the global enterprise, to support a variety of engineering business processes for up to 30,000-plus users. Airbus, a veteran PLM user, employs multiple PLM and design tool platforms, including Dassault Systemes’ CATIA for digital mockups and ENOVIA as the MCAD vault in addition to PTC’s Windchill, which is used to manage and control product data.


PLM Software CIMdata
CIMdata - July 2015
The Rail Control Solutions (RCS) division of Bombardier, the world’s leading manufacturer of both planes and trains, has selected the Aras Innovator® solution suite. Bombardier RCS will leverage Aras to streamline configuration management, change management, and compliance across the supply chain.


PLM Software CIMdata
CIMdata - July 2015
Starlite selected Aras for its more modern PLM architecture, particularly the flexibility and ease-of-use provided to both business and technical users within Starlite’s extended enterprise. The open architecture of Aras will enable platform-independent data sharing between Starlite’s global locations and customers worldwide.


PLM Software CIMdata
CIMdata - July 2015
ESCATEC chose Aras after conducting a successful proof-of-concept project with Aras. ESCATEC identified the comprehensive functionality, flexibility and ease of configuration as a key difference compared to other PLM systems, noting that Aras enables the introduction of process changes in step with evolving customer demands.


PLM Software Monoist
Monoist - July 2015
Arasは2015年6月24日、高性能産業用機械の大手メーカーである伊Bretonが、エンタープライズPLMとしてArasソリューション・スイートを導入すると発表した。現在Bretonでは、ドキュメント管理、テクニカルBOM管理、製品ナレッジ管理、構成管理のためにArasを使用している。今回、迅速な製品設計環境を構築するため、SAP ERPとシーメンスのSolid Edge、ThinkDesign CADの統合を含むAras PLMの導入を決定した。


PLM Software ENGINEERING.COM
ENGINEERING.COM - July 2015
Aras Corp. recently announced that the aerospace giant Airbus has picked up 30,000 seats of its Innovator platform and suite. ording to the press release, Airbus made the decision after examining a number of PLM solutions, finding that Aras provided the most simple and agile platform for large-scale, enterprise-wide scaling.


PLM Software Beyond PLM
Beyond PLM - July 2015
It looks likes Aras has a potential to change a status quo among top tier of PLM providers. You can think about Aras as a “pain relief” for companies thinking how to grow their PLM development and concerned about a ROI speed.


PLM Software CIMdata
CIMdata - July 2015
During the two day conference, industry leaders will discuss how they transformed their business with Aras. The theme of ACE 2015 Japan is “Rethink PLM.” Sessions will revolve around the conference theme and are designed to encourage interaction, learning and networking.


PLM Software CIMdata
CIMdata - July 2015
“Our success with the deployment of Test Information Management for aircraft end-to-end across the structural test pyramid in multi-site operation including our extended enterprise proved the viability of Aras for complex engineering business processes,” said Anders Romare, Vice President, Engineering Solutions at Airbus. “The unique SaaS subscription business model of Aras which eliminates up-front license costs and includes system upgrades with customizations is also quite compelling.”


PLM Software Graphic Speak
Graphic Speak - June 2015
Airbus has a two-fold strategy for using Aras Innovator. The first is as a modern environment to connect users with the multiple existing PLM installations at Airbus. PLM software is selected on a project-by-project basis at Airbus.


PLM Software Desktop Engineering
Desktop Engineering - June 2015
Breton is using Aras for document management, technical BOM (bill of materials) management, product knowledge management and configuration management. The company’s current Aras system manages 7TB of Breton data, including 150,000 parts, 250,000 CAD documents and 450,000 BOM relationships.


PLM Software TenLinks
TenLinks - June 2015
Leveraging the Aras platform, Breton has streamlined its quoting processes and gained fast prototyping with instant workflow modeling. This has led to a significantly higher win percentage during competitive bids and a 60 percent increase in design capacity. This is the result of having all product-related data in a single, easy-to-access, web-based system.


PLM Software ZDNet Japan
ZDNet Japan - June 2015
PLM(product lifecycle management)は、製品ライフサイクル管理と呼ばれるソフトウェア分野だ。製品の設計、製造、サービス、廃棄までのライフサイクル全体の情報を一元的に管理する。自動車、家電製品をはじめ、あらゆる機械や機器製造企業にとって、ビジネスの根幹にかかわるIT製品である。


PLM Software TenLinks
TenLinks - June 2015
A pioneer in its field, Akrapovič is widely recognized as a highly innovative materials technology company in the automotive industry. Akrapovič will leverage Aras to establish a single, enterprise-wide version of the truth across the entire product lifecycle, from ideation to production and sales.


PLM Software TenLinks
TenLinks - June 2015
After evaluating several PLM solutions, JAMCO chose to integrate and replace two traditional PDM systems with the more modern and flexible platform technology in Aras. The open architecture of Aras will enable platform-independent data sharing among JAMCO’s locations in Japan and overseas and collaboration across the extended enterprise.


PLM Software CIMdata
CIMdata - June 2015
After evaluating several PLM solutions, JAMCO chose to integrate and replace two traditional PDM systems with the more modern and flexible platform technology in Aras. The open architecture of Aras will enable platform-independent data sharing among JAMCO’s locations in Japan and overseas and collaboration across the extended enterprise.


PLM Software Nikkei Technology Online
Nikkei Technology Online - June 2015
3Dデータに加えてソフトもエレも管理


PLM Software Monoist
Monoist - June 2015
IoTがあらゆる製品に変化をもたらすといわれている中、設計・製造系のシステムが変化しなくていいのだろうか。「エンタープライズ・オープンソース・ビジネスモデル」として独自のPLMを展開する米国Arasの創業者でCEOであるピーター・シュローラ(Peter Schroer)氏は「古いPLMは競争力を失う」と指摘する。同氏にIoTによる製造業の環境の変化とPLMの変化について聞いた。


PLM Software MCAD Café
MCAD Café - June 2015
The theme of ACE 2015 Japan is “Rethink PLM.” The challenges posed by Japan’s manufacturing industry today, such as accelerated globalization and the need to address IoT and other emerging technologies, has led many organizations to ask if their legacy PLM systems can address their ever-changing needs.


PLM Software CIMdata
CIMdata - June 2015
To celebrate the expansion of the CAI, Aras is holding an open house on Wednesday, June 24th. The event will give attendees the opportunity to learn more about the CAI initiatives, network with the Aras Community and meet Peter Schroer, CEO of Aras.


PLM Software TenLinks
TenLinks - June 2015
DWFritz Automation, a leader in the design and building of precision inspection & assembly equipment, has selected the Aras PLM platform to streamline and automate processes, enterprise wide. DWFritz will leverage Aras for part and bill of material management, SOLIDWORKS CAD file management, document management and engineering change management.


PLM Software Desktop Engineering
Desktop Engineering - June 2015
The CAI, according to the company, combines Aras’ advanced PLM platform, open architecture and varied resources to provide automotive OEMs (original equipment manufacturers) and suppliers with enterprise solutions. These solutions can help drive innovation and advance development, implementation and adoption of vehicle technology, a press release states.


PLM Software MCAD Café
MCAD Café - June 2015
Aras announced the expansion of the Center for Automotive Innovation (CAI) in Detroit, Michigan. The CAI combines Aras’s advanced PLM platform and open architecture with knowledgeable, specialized resources to provide automotive OEMs and suppliers around the world with best-in-class enterprise solutions to drive innovation and advance the development, implementation and adoption of emerging vehicle technology.


PLM Software CIMdata
CIMdata - June 2015
Aras held their latest ACE conference from April 21 through April 23 2015. This annual event continues to grow; this year there were over 400 registrants from around the globe. The theme this for year’s Aras ACE conference was “RETHINK PLM” which inspired attendees to reconsider how PLM can be implemented to support rapid changes due to changing business and technology needs.


PLM Software Desktop Engineering
Desktop Engineering - May 2015
A division of Lockheed Martin Corporation has selected Aras Innovator as its new product lifecycle management (PLM) software. The aerospace and defense company will leverage the Innovator platform to streamline configuration management, change management as well as Maintenance Repair and Overhaul (MRO) across the supply chain.


PLM Software TenLinks
TenLinks - May 2015
A division of Lockheed Martin Corp., an American global aerospace, defense, security and advanced technology company, has selected the Aras Innovator suite. Lockheed Martin will leverage Aras to streamline configuration management, change management, maintenance repair and overhaul (MRO) across the supply chain.


PLM Software TenLinks
TenLinks - May 2015
Aras’s flexibility and ability to meet the requirements of POET’s rapidly growing business were key drivers in the selection process. Working with Aras Partner EBD Advisors, POET will implement multiple Aras solutions, including Advanced Product Data Management, Configuration Management, Change Management and BOM Management.


PLM Software CIMdata
CIMdata - May 2015
POET, a world-leading producer of ethanol and other biorefined products, has selected the Aras PLM Solution Suite to drive product development and engineering best practices, improve processes and product tracking, and improve visibility into product-related data throughout the enterprise and extended supply chain.


PLM Software Monoist
Monoist - May 2015
日立製作所電力システムは、エンタープライズPLMにArasの「Aras Innovator」を採用した。業務プロセスと製品のデータソースを単一のシステムで管理することで、業務品質の向上とリードタイムの短縮が可能になるという。


PLM Software IT Leaders
IT Leaders - May 2015
製造業においては、単に性能や機能が優れたプロダクトを製造するだけでは昨今の厳しい市場競争に勝つことができない。設計から製造、出荷後のサポートに至るまでのプロセスを合理化すると共に、それぞれのプロセスに紐づく製品のデータも常に参照できる仕組みを整え、業務品質の持続的向上や、コスト競争力の強化を図る取り組みが欠かせない。


PLM Software Nikkei Business Online
Nikkei Business Online - May 2015
IoT(Internet of Things:モノのインターネット)製品のモノづくりでは、機械系・電気系・組み込みソフトウェアの開発を統合的に進めていくことが求められる。また、インターネット接続によって製品価値を高めるには、サービス開発との連携も必須。アラスは自社のPLM(Product Lifecycle Management:製品ライフサイクル管理)製品とIBM Continuous Engineeringを連携させることによって、この目的を達成していく。


PLM Software Desktop Engineering
Desktop Engineering - May 2015
The company, according to a press release, plans to use Innovator as the backbone to its new global engineering IT network. This decision is part of a plan to optimize manufacturing efficiency and product quality.